Turn your phone
into a field meter.
MobileSense connects any Agrinovo probe to your phone over USB-C. Read pH, dissolved oxygen, EC and more right in the field. Every measurement is tagged with the worker, the time, and the GPS location, then sent straight to the manager.
The handheld meter has a blind spot
It shows a number, then forgets it. Everything after that is paper.
A number with no memory
- The reading lives on a screen for a few seconds, then it is gone
- Workers copy values onto paper, then someone types them into a spreadsheet
- No proof of who measured, when, or at which pond
- A separate meter for every parameter, each one its own device to carry and charge
Every reading captured and placed
- Each reading is saved the moment it is taken, with no manual entry
- Worker, time, and GPS location stamped on every measurement
- The manager sees the data live, no paper to collect, no spreadsheet to fill
- One adapter reads any Agrinovo probe, so you swap the probe instead of the meter
Plug in. Read. Done.
The whole field check takes seconds, and the manager sees it instantly.
Plug in the adapter
Connect MobileSense to your phone's USB-C port. No pairing, no setup, no batteries to charge.
Connect the probe
Attach any Agrinovo probe and dip it in the pond, tank, or soil. The same sensors you already trust.
Read on your phone
The live value shows in the app. Worker, time, and GPS location are recorded with the reading automatically.
Manager sees it live
The reading lands on the manager's dashboard the moment it is taken, mapped to the exact site it came from.
More than a meter
MobileSense replaces the handheld device, the paper form, and the data entry, all at once.
One adapter, any probe
MobileSense reads the same Agrinovo probes that connect to our controllers: pH, dissolved oxygen, EC, ORP, temperature, turbidity, and ion-selective sensors. Swap the probe to change what you measure.
You buy a sensor once and decide how to use it. Mount it on a Genesis controller for permanent monitoring, or carry it with MobileSense for spot checks across the farm.
Live readings, no extra device
The phone you already carry becomes the screen, the keypad, and the connection. There is no handheld unit to buy, calibrate, charge, or replace when it gets dropped in a pond.
Readings appear instantly in the app and upload to the cloud on the spot, so the value is recorded before the worker has even left the site.
Know the work was done
Every measurement carries the worker who took it, the time, and the GPS location. The manager can see at a glance which sites were checked, when, and by whom.
No more wondering whether a round was completed or whether numbers were filled in from memory at the end of the day. The record is the work.
Cover many sites, no hardware sprawl
You do not have to install a controller and sensor at every pond, tank, or plot to keep an eye on them. Workers walk the sites with one adapter and a probe, and each reading lands on the map.
It is the practical way to monitor a large operation with many sampling points: fixed devices where you need continuous data, MobileSense everywhere else.
One small adapter does it all
This is the whole device. USB-C into the phone on one end, an Agrinovo sensor connector on the other. It draws power from the phone, so there is no battery to charge and nothing to maintain. It fits in a pocket and goes wherever your workers go.
- Connects any Agrinovo digital probe
- No battery, no charging, nothing to calibrate on the adapter
- The same probe also works on an Omni Genesis controller
One adapter, the whole sensor range
Connect any Agrinovo probe and read it on your phone.
Frequently asked questions
Put the meter, the form, and the manager in one phone.
Tell us what you need to measure and how many sites you cover. We will put together a MobileSense kit with the right probes.
Get MobileSense